In 3D printing, there will be some situations that your model will have overhangs area which not able to print in the air due to nothing there to hold your model / layer. There is few situation that you will encounter and think about might or might not need to […]
illusivesolutions
7 posts
SLA 3D print is an additive manufacturing process belongs to the Vat Photopolymerization. In SLA, an object is created by layer-by-layer using an UV laser beam. The materials used in SLA are photosensitive thermoset polymers that come in a liquid form and normally we call is Resin. Below is how […]
As spoken on last post, infill is measured in percentage from 0% – 100%. In a common understanding, higher the percentage / density it makes the printed object heavier and more solid print. As vice versa, a lower percentage / density of infill the printed object will be in more […]
“Infill” is the internal structure that is inside a 3d print object. It designated by using percentage and pattern for the element as follow in influence of print weight, material usage, strength, and print time. For infill percentage it will be measure by 0% – 100%, the higher the percentage, […]
Layer Height = Quality & time consume of the 3D print and it is one of the setting that often changes and it will be creating different quality outcome in different settings. How it works? This setting is calculate in mm for the thickness, the settings start from 0.06mm until […]
Type of 3D Printer Until year 2019, there are currently having 10 types of 3D printer in the market. There are:- Fused Deposition Modeling (FDM), Stereolithography (SLA), Digital Light Processing (DLP), Selective Laser Sintering (SLS), Material Jetting (MJ), Drop on Demand (DOD), Direct Metal Laser Sintering (DMLS) / Selective Laser […]
In short, 3D printing is a process from digital model / files turn into a physical Three Dimensional object. In order to create / 3D print the physical object, this is where the additive processes come in. During the process, the object is being create by laying down successful layer […]